Tilausrivit 0

Ahlsell Tuotteet Teollisuus Paineilma Pneumatiikka Alipainekomponentit Alipainekomponentit FestoLisätarvikkeet alipainekomponentit Festo

Lisätarvikkeet alipainekomponentit Festo

Tuotteet (20)

Alipaine-ejektori Festo ISV

Alipaine-ejektori Festo ISV

Tuotenumero: T18004966

The ISV valve is fitted between the vacuum generator and the suction cup. If, during vacuum generation, a suction cup is uncovered, or only partly covered, the ISV automatically stops the influx of air. When the suction cup fits tightly against the surface, a vacuum is regenerated. Removal of the object from the suction cup causes the ISV valve to close immediately.
Temperature range –10 … +60 °C. Operating pressure –0.95 … 0 bar.

Alipaine-ejektori Festo ISV

Alipaine-ejektori Festo ISV

Alipaine-ejektori Festo ISV

Alipaine-ejektori Festo ISV

Alipainemittari Festo VAM/FVAM

Alipainemittari Festo VAM/FVAM

Tuotenumero: T18004554

Vacuum gauge VAM, EN 837-1. Temperature range –10 … +60 °C. Pressure –1 … +9 bar. Analogue display via Bourdon tube. Vacuum gauges can be loaded up to ¾ of their full scale value under static load and up to 2/3 under intermittent load conditions.
Vacuum gauge VAM, EN 837-1, with red-green range. Temperature range –10 … +60 °C. Pressure –1 … 0 bar. Analogue display via Bourdon tube. Vacuum gauges can be loaded up to ¾ of their full scale value under static load and up to 2/3 under intermittent load conditions. The adjustable red-green range provides additional safety when monitoring compressed air.

Alipainemittari Festo VAM/FVAM

Alipainemittari Festo VAM/FVAM

Alipainemittari Festo VAM/FVAM

Alipainemittari Festo VAM/FVAM

Alipainemittari Festo VAM/FVAM

Tyhjiöimulaitteen pidike Festo ESH-HA

Tyhjiöimulaitteen pidike Festo ESH-HA

Tuotenumero: T18103120

Vacuum port on top, mounting via lock nut, without height compensator. Vacuum port: Push-in connector QS. Barbed fitting connection PK. Threaded connection G.

Tyhjiöimulaitteen pidike Festo ESH-HA

Tyhjiöimulaitteen pidike Festo ESH-HA

Alipainesuodatin Festo VAF-DB

Alipainesuodatin Festo VAF-DB

Tuotenumero: T13001999

Temperature range –5 … +50 °C. Operating pressure –0.95 … 0 bar

Alipainesuodatin Festo VAF-DB

Alipainesuodatin Festo VAF-DB

Alipainesuodatin Festo VAF-PK

Alipainesuodatin Festo VAF-PK

Tuotenumero: T18004784

Temperature range 0 … +40 °C. Operating pressure –0.95 … 0 bar
The vacuum filter is used to filter particles in the direction of suction. The vacuum filter is inserted as an inline filter in the tubing line. On initial installation any flow direction can be chosen. After disassembly and installation
of the vacuum filter the original flow direction must be kept. The fabric filter element is located in a transparent housing so that the degree of contamination of the filter cartridge can be identified. It is not possible to replace the filter.

Alipainesuodatin Festo VAF-PK

Alipainesuodatin Festo VAF-PK

Suodatinpatruuna Festo VAF-DB

Suodatinpatruuna Festo VAF-DB

Tuotenumero: T18004880

Filter cartridge VAF-DB-P for vacuum filter VAF-DB. Type of mounting: plug-in. Material: PE. Note on materials: RoHS-compliant. Contains PWIS (paint-wetting impairment substances)

Suodatinpatruuna Festo VAF-DB

Imukuppiholkki Festo OASI

Imukuppiholkki Festo OASI

Tuotenumero: T18106529

For suction cups with connection attachments/suction cups, bellows with 3.5 convolutions. The suction cup insert is compatible with the ESG suction gripper range. It is suitable for bellows suction cups with 3.5 convolutions and is simply snapped into the bellows. The support offered by the suction cup insert enables delicate and fragile workpieces to be transported.
Areas of application:
– Semiconductor industry (wafers, solar cells)
– Electronics industry (printed circuit boards, plastic film)
– Paper industry
– PE film

Imukuppiholkki Festo OASI

Imukuppiholkki Festo OASI

Manuaali Festo P.BE-SPC11-DSMI-EN

Manuaali Festo P.BE-SPC11-DSMI-EN

Tuotenumero: T18103557

Manuaali Festo P.BE-SPC11-DSMI-EN

Varaosasarja Festo DNC

Varaosasarja Festo DNC

Tuotenumero: 421263

Tyhjiöimulaitteen pidike Festo ESH-HB

Tyhjiöimulaitteen pidike Festo ESH-HB

Tuotenumero: T18103123

Vacuum port on side, mounting via female thread, without height compensator
Vacuum port: Push-in connector QS. Barbed fitting connection PK. Threaded connection G.

Tyhjiöimulaitteen pidike Festo ESH-HB

Tyhjiöimulaitteen pidike Festo ESH-HB

Imutarrain Festo ESG

Imutarrain Festo ESG

Tuotenumero: 74609846

Imutarrain Festo ESG konfiguroitava. Tekniset tiedot kohdasta dokumentit.

Imutarrain Festo ESG

Imutarrain Festo ESG

Tyhjiöimulaitteen pidike Festo ESH-HC

Tyhjiöimulaitteen pidike Festo ESH-HC

Tuotenumero: T18103124

Vacuum port on top, mounting via lock nut, with height compensator
Vacuum port: Push-in connector QS. Barbed fitting connection PK. Threaded connection G.

Tyhjiöimulaitteen pidike Festo ESH-HC

Tyhjiöimulaitteen pidike Festo ESH-HC

Tyhjiöimulaitteen pidike Festo ESH-HC

Tyhjiöimulaitteen pidike Festo ESH-HC

Tyhjiöimulaitteen pidike Festo ESH-HE

Tyhjiöimulaitteen pidike Festo ESH-HE

Tuotenumero: T18103137

Vacuum port on top, mounting via threaded connection for direct screw-in, without height compensator. Vacuum port: Threaded connection M3 and M5. Threaded connection Gx and G¼.

Tyhjiöimulaitteen pidike Festo ESH-HE

Tyhjiöimulaitteen pidike Festo ESH-HE

Tyhjiöimulaitteen pidike Festo ESH-HE

Asennuskomponentit tyhjiötekniikalle Festo

Asennuskomponentit tyhjiötekniikalle Festo

Tuotenumero: 511266

Mounting plate VN-T for vacuum generators VN-A/B/M. Internet: vn. For wall mounting with through hole for housing type T3/T4. Material: Plate: Galvanised steel. RoHS-compliant. Free of copper and PTFE.
Mounting bracket VAF-DB-HR for vacuum filter VAF-DB. Type of mounting: threaded. Max. tightening torque: 0.63 Nm. Materials: High-alloy stainless steel. Note on materials: RoHS-compliant. Contains PWIS (paint-wetting impairment substances)

Asennuskomponentit tyhjiötekniikalle Festo

Asennuskomponentit tyhjiötekniikalle Festo

Asennuskomponentit tyhjiötekniikalle Festo

Asennuskomponentit tyhjiötekniikalle Festo

Asennuskomponentit tyhjiötekniikalle Festo

Jakomoduli Festo

Jakomoduli Festo

Tuotenumero: 421179

Jakomoduli Festo

Jakomoduli Festo

Jakomoduli Festo

Joustinyksikkö Festo VAL

Joustinyksikkö Festo VAL

Tuotenumero: 511138

Height compensator VAL. Accessory for suction cups with connection attachments VAS/VASB.

Joustinyksikkö Festo VAL

Tyhjiöimulaitteen pidike Festo ESH-HCL

Tyhjiöimulaitteen pidike Festo ESH-HCL

Tuotenumero: T18103129

Vacuum port on top, mounting via lock nut, with long height compensator. Vacuum port: Push-in connector QS. Barbed fitting connection PK. Threaded connection G.

Tyhjiöimulaitteen pidike Festo ESH-HCL

Tyhjiöimulaitteen pidike Festo ESH-HCL

Tyhjiöimulaitteen pidike Festo ESH-HDL

Tyhjiöimulaitteen pidike Festo ESH-HDL

Tuotenumero: T18103135

Vacuum port on side, mounting via lock nut, with long height compensator. Vacuum port: Push-in connector QS. Barbed fitting connection PK. Threaded connection G.

Tyhjiöimulaitteen pidike Festo ESH-HDL

Kulma-tasain Festo ESWA

Kulma-tasain Festo ESWA

Tuotenumero: T18103255

Accessory for suction gripper ESG, mounted between suction cup holder and suction cup with connection attachments.

Tyhjiöimulaitteen pidike Festo ESH-HD

Tyhjiöimulaitteen pidike Festo ESH-HD

Tuotenumero: T18004802

Vacuum port on side, mounting via lock nut, with height compensator. Vacuum port: Push-in connector QS. Barbed fitting connection PK. Threaded connection G.

Tyhjiöimulaitteen pidike Festo ESH-HD

Tyhjiöimulaitteen pidike Festo ESH-HD

Tyhjiöimulaitteen pidike Festo ESH-HD