Ahlsell
Tilausrivit 0
Pikatilaus
AhlsellTuotteetTeollisuusPaineilmaPneumatiikka

Pneumatiikka

Suodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarja
Festo
Suodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarja
Tuotenumero: T18005102
Flow rate 850 … 7,200 l/min. Temperature range –10 … +60 °C. Operating pressure 0.8 … 20 bar.
With this device, the filter and pressure regulator are combined into a single unit. The sintered filter with water separator removes contamination, pipe sinter, rust and condensate from the compressed air.
Good regulation characteristics with low hysteresis and primary pressure compensation. Good particle and condensate separation. Available with or without secondary venting. High flow rate. Directly-actuated diaphragm
regulator. Four pressure regulation ranges: 0.3 … 4 bar, 0.3 … 7 bar, 0.5 … 12 bar and 0.5 … 16 bar. Regulator lock for protecting the values against adjustment. Two pressure gauge connections for different fitting options. Return flow option for exhausting from output 2 to output 1 already integrated. Optional pressure sensor. Optional device variant EX4 for use in potentially explosive areas in zones 1, 2, 21 and 22. Choice of filter cartridges:
5 μm or 40 μm.
Suodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarjaSuodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarjaSuodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarjaSuodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarjaSuodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarja
+
41
Tarkkuuspaineensäädin Festo LRP/LRPS koko 50
Festo
Tarkkuuspaineensäädin Festo LRP/LRPS koko 50
Tuotenumero: T18102155
Flow rate 800 … 2,300 l/mi. Temperature range –10 … +60 °C. Operating pressure 1 … 12 bar.
The precision pressure regulator controls operating pressure (secondary side) with a diaphragm pilot control, which acts upon the main seat and thus achieves improved regulating characteristics. Precision pressure adjustment possible both in static and dynamic applications. Pressure hysteresis of <0.02 bar for flow rate characteristic curve. Good response characteristics during rapid alteration of supply pressure and flow rate. Supply pressure fluctuations are almost entirely compensated. Product variants LRP-…-EX4 can be used in zones 1 and 2 of explosive gas atmospheres and in zones 21 and 22 of explosive dust atmospheres.
Tarkkuuspaineensäädin Festo LRP/LRPS koko 50Tarkkuuspaineensäädin Festo LRP/LRPS koko 50Tarkkuuspaineensäädin Festo LRP/LRPS koko 50Tarkkuuspaineensäädin Festo LRP/LRPS koko 50Tarkkuuspaineensäädin Festo LRP/LRPS koko 50
Sumuvoitelulaite Festo MS4/MS6-LOE MS-sarja
Festo
Sumuvoitelulaite Festo MS4/MS6-LOE MS-sarja
Tuotenumero: T18005043
Flow rate 1,100 … 7,200 l/min. Temperature range –10 … +60 °C. Operating pressure 1 … 16 bar.
The proportional lubricator adds a precision adjustable quantity of oil to the compressed air stream. The pressure drop that occurs when air flows through a Venturi nozzle is used to convey oil from the container to the drip cap. From here, the oil drips into the air duct directly behind the proportional valve, where it is atomised. The oil mist component is proportional to the compressed air flow rate. Proportional lubricator with precision oil metering. Reduces wear on drive units subject to high loading. High flow rate. Quick and easy oil top-up even during operation (under pressure). Optional device variant EX4 for use in potentially explosive areas in zones 1, 2, 21 and 22.
Sumuvoitelulaite Festo MS4/MS6-LOE MS-sarjaSumuvoitelulaite Festo MS4/MS6-LOE MS-sarjaSumuvoitelulaite Festo MS4/MS6-LOE MS-sarjaSumuvoitelulaite Festo MS4/MS6-LOE MS-sarjaSumuvoitelulaite Festo MS4/MS6-LOE MS-sarja
Paineensäädin Festo MS
Festo
Paineensäädin Festo MS
Tuotenumero: T18005065
Flow rate 1,000 … 7,500 l/min. Temperature range –10 … +60 °C. Operating pressure 0.8 … 20 bar.
The pressure regulator maintains a constant working pressure (secondary side), regardless of the pressure variations in the system (primary side) and the air consumption. Good regulation characteristics with low hysteresis and primary pressure compensation. High flow rate with minimal pressure drop. Available with and without secondary venting. Regulator lock for protecting the values against adjustment. Four pressure regulation ranges:
0.3 … 4 bar, 0.3 … 7 bar, 0.5 … 12 bar and 0.5 … 16 bar. Two pressure gauge connections for different fitting options. Return flow option for exhausting from output 2 to output 1 already integrated. Optional pressure sensor. Optional rotary knob pressure gauge. Optional device variant EX4 for use in potentially explosive areas in zones 1, 2, 21 and 22
Paineensäädin Festo MSPaineensäädin Festo MSPaineensäädin Festo MSPaineensäädin Festo MSPaineensäädin Festo MS
+
15