Ahlsell
Tilausrivit 0
Pikatilaus
AhlsellTuotteetTeollisuusPaineilmaPneumatiikkaIlman esikäsittely

Ilman esikäsittely

Ilman esikäsittely Festo
Ilman esikäsittely - Aventics
Ilman esikäsittely - Muut
Suodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarja
Festo
Suodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarja
Tuotenumero: T18005102
Flow rate 850 … 7,200 l/min. Temperature range –10 … +60 °C. Operating pressure 0.8 … 20 bar.
With this device, the filter and pressure regulator are combined into a single unit. The sintered filter with water separator removes contamination, pipe sinter, rust and condensate from the compressed air.
Good regulation characteristics with low hysteresis and primary pressure compensation. Good particle and condensate separation. Available with or without secondary venting. High flow rate. Directly-actuated diaphragm
regulator. Four pressure regulation ranges: 0.3 … 4 bar, 0.3 … 7 bar, 0.5 … 12 bar and 0.5 … 16 bar. Regulator lock for protecting the values against adjustment. Two pressure gauge connections for different fitting options. Return flow option for exhausting from output 2 to output 1 already integrated. Optional pressure sensor. Optional device variant EX4 for use in potentially explosive areas in zones 1, 2, 21 and 22. Choice of filter cartridges:
5 μm or 40 μm.
Suodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarjaSuodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarjaSuodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarjaSuodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarjaSuodatinsäädinyksikkö Festo MS4/MS6-LFR, MS-sarja
+
43
Tarkkuuspaineensäädin Festo LRP/LRPS koko 50
Festo
Tarkkuuspaineensäädin Festo LRP/LRPS koko 50
Tuotenumero: T18102155
Flow rate 800 … 2,300 l/mi. Temperature range –10 … +60 °C. Operating pressure 1 … 12 bar.
The precision pressure regulator controls operating pressure (secondary side) with a diaphragm pilot control, which acts upon the main seat and thus achieves improved regulating characteristics. Precision pressure adjustment possible both in static and dynamic applications. Pressure hysteresis of <0.02 bar for flow rate characteristic curve. Good response characteristics during rapid alteration of supply pressure and flow rate. Supply pressure fluctuations are almost entirely compensated. Product variants LRP-…-EX4 can be used in zones 1 and 2 of explosive gas atmospheres and in zones 21 and 22 of explosive dust atmospheres.
Tarkkuuspaineensäädin Festo LRP/LRPS koko 50Tarkkuuspaineensäädin Festo LRP/LRPS koko 50Tarkkuuspaineensäädin Festo LRP/LRPS koko 50Tarkkuuspaineensäädin Festo LRP/LRPS koko 50Tarkkuuspaineensäädin Festo LRP/LRPS koko 50
Sumuvoitelulaite Festo MS4/MS6-LOE MS-sarja
Festo
Sumuvoitelulaite Festo MS4/MS6-LOE MS-sarja
Tuotenumero: T18005043
Flow rate 1,100 … 7,200 l/min. Temperature range –10 … +60 °C. Operating pressure 1 … 16 bar.
The proportional lubricator adds a precision adjustable quantity of oil to the compressed air stream. The pressure drop that occurs when air flows through a Venturi nozzle is used to convey oil from the container to the drip cap. From here, the oil drips into the air duct directly behind the proportional valve, where it is atomised. The oil mist component is proportional to the compressed air flow rate. Proportional lubricator with precision oil metering. Reduces wear on drive units subject to high loading. High flow rate. Quick and easy oil top-up even during operation (under pressure). Optional device variant EX4 for use in potentially explosive areas in zones 1, 2, 21 and 22.
Sumuvoitelulaite Festo MS4/MS6-LOE MS-sarjaSumuvoitelulaite Festo MS4/MS6-LOE MS-sarjaSumuvoitelulaite Festo MS4/MS6-LOE MS-sarjaSumuvoitelulaite Festo MS4/MS6-LOE MS-sarjaSumuvoitelulaite Festo MS4/MS6-LOE MS-sarja
Paineensäädin Festo MS
Festo
Paineensäädin Festo MS
Tuotenumero: T18005065
Flow rate 1,000 … 7,500 l/min. Temperature range –10 … +60 °C. Operating pressure 0.8 … 20 bar.
The pressure regulator maintains a constant working pressure (secondary side), regardless of the pressure variations in the system (primary side) and the air consumption. Good regulation characteristics with low hysteresis and primary pressure compensation. High flow rate with minimal pressure drop. Available with and without secondary venting. Regulator lock for protecting the values against adjustment. Four pressure regulation ranges:
0.3 … 4 bar, 0.3 … 7 bar, 0.5 … 12 bar and 0.5 … 16 bar. Two pressure gauge connections for different fitting options. Return flow option for exhausting from output 2 to output 1 already integrated. Optional pressure sensor. Optional rotary knob pressure gauge. Optional device variant EX4 for use in potentially explosive areas in zones 1, 2, 21 and 22
Paineensäädin Festo MSPaineensäädin Festo MSPaineensäädin Festo MSPaineensäädin Festo MSPaineensäädin Festo MS
+
16
Pehmokäynnistys/pikapoistoventtiili Festo MS6-SV-E, MS-sarja
Festo
Pehmokäynnistys/pikapoistoventtiili Festo MS6-SV-E, MS-sarja
Tuotenumero: T18005115
Flow rate 4,300 l/min. Temperature range –10 … +50 °C. Operating pressure 3.5 … 10 bar
The electro-pneumatic soft-start and quick exhaust valve is used to reduce pressure quickly and reliably and to build up pressure gradually in industrial pneumatic systems and terminals. The device is a self-testing, redundant mechatronic system conforming to the requirements of EN ISO 13849-1. The safety-related pneumatic protection objective of safe venting is also guaranteed in the event of faults inside the valve (e.g. due to wear, contamination, electronic faults). Thanks to the 2-channel design and its monitoring, the device fulfils controller category 3 and 4 requirements. This enables a performance level of max. "e" to be attained. The device receives the secure enable signals (EN1/EN2) via the electrical connection (multi-pin plug socket NECA Sub-D, 9-pin or AS-i connecting cable). The signals in question come from commercially available electronic or electromechanical safety switching devices which monitor the protective equipment of the machine (e.g. emergency stop, light curtain, electrical door switch of a protective enclosure, etc.).
Pehmokäynnistys/pikapoistoventtiili Festo MS6-SV-E, MS-sarjaPehmokäynnistys/pikapoistoventtiili Festo MS6-SV-E, MS-sarjaPehmokäynnistys/pikapoistoventtiili Festo MS6-SV-E, MS-sarja
Suodatinsäädinyksikkö Festo MS9-LFR, MS-sarjat
Festo
Suodatinsäädinyksikkö Festo MS9-LFR, MS-sarjat
Tuotenumero: T18005662
Flow rate 6,000 … 23,000 l/min. Temperature range –10 … +60 °C. Supply pressure 1 … 20 bar
Good regulation characteristics with low hysteresis and primary pressure compensation. Good particle and condensate separation. Piloted or directly actuated filterdiaphragm regulator. High flow rates. Available with or without secondary venting. Four pressure regulation ranges: 0.5 … 4 bar, 0.5 … 7 bar, 0.5 … 12 bar and 0.5 … 16 bar. Pressure gauge connection for different fitting options. Available with manual, semi-automatic, fully automatic or fully automatic, electrically actuated condensate drain. Actuator lock to protect set values against adjustment. Optional pressure sensor. Choice of filter cartridges: 5 μm or 40 μm. New filter cartridges 49. Optional device variant EX4 for use in potentially explosive areas in zones 1, 2, 21 and 22.
Suodatinsäädinyksikkö Festo MS9-LFR, MS-sarjatSuodatinsäädinyksikkö Festo MS9-LFR, MS-sarjatSuodatinsäädinyksikkö Festo MS9-LFR, MS-sarjatSuodatinsäädinyksikkö Festo MS9-LFR, MS-sarjatSuodatinsäädinyksikkö Festo MS9-LFR, MS-sarjat
+
6
Huoltolaite Festo LFR-K/LFRS-K, D-sarja
Festo
Huoltolaite Festo LFR-K/LFRS-K, D-sarja
Tuotenumero: T18102829
LFR-KA/LFRS/KA
Flow rate 720...9400 l/min. Temperature range -10...+60°C. Operating pressure 1...16 bar.
LFR-KB/LFRS-KB
Flow rate 700...8400 l/min.Temperature range -10...+60°C. Operating pressure 1...16 bar.
LFR-KC/LFRS-KC
Flow rate 750...8400 l/min. Temperature range -10...+60°C. Operating pressure 1...16 bar.
LFR-KD/LFRS-KD
Flow rate 595...5000 l/min.Temperature range -10...+60°C. Operating pressure 3...16 bar.
LFR-KE/LFRS-KE
Flow rate 720...9400 l/min. Temperature range -10...+60°C. Operating pressure 1...16 bar.
LFR-KF/LFRS-KF
Flow rate 700...8400 l/min. Temperature range -10...+60°C. Operating pressure 1...16 bar.
LFR-KG/LFRS-KG
Flow rate 575...4900 l/min.Temperature range -10...+60°C. Operating pressure 3...16 bar.
LFR-KB polymer
Nominal Flow rate 1900 l/min. Temperature range -5...+50°C. Operating pressure 1.5...10 bar.
LFR-KC polymer
Nominal Flow rate 1900 l/min. Temperature range -5...+50°C. Operating pressure 1.5...10 bar.

Options for service unit combinations
KA Filter regulator, branching module KB On-off valve manually actuated, filter regulator, branching module
KC On-off valve manually actuated, filter regulator
KD Filter regulator, on-off valve solenoid actuated, 24 V DC, soft-start valve pneumatically actuated
KE Filter regulator, branching module with pressure switch
KF On-off valve manually actuated, filter regulator, branching module with pressure switch
KG On-off valve manually actuated, filter regulator, on-off valve solenoid actuated, 24 V DC, soft-start valve pneumatically actuated, branching module withpressure switch
Huoltolaite Festo LFR-K/LFRS-K, D-sarjaHuoltolaite Festo LFR-K/LFRS-K, D-sarjaHuoltolaite Festo LFR-K/LFRS-K, D-sarjaHuoltolaite Festo LFR-K/LFRS-K, D-sarjaHuoltolaite Festo LFR-K/LFRS-K, D-sarja
+
38
Tarkkuuspaineensäädin Festo MS6-LRP, MS-sarja
Tarkkuuspaineensäädin Festo MS6-LRP, MS-sarja
Tuotenumero: T18005106
Flow rate 800 … 5,000 l/min. Temperature range –10 … +60 °C. Operating pressure 1 … 14 bar
The precision pressure regulator is suitable for sensitive applications with a required hysteresis of 0.02 bar. The output pressure p2 can be set within the pressure regulation range either manually using the rotary knob or pneumatically via a pilot pressure p12 by an external pilot regulator (if possible using a precision pressure regulator). When switching off the input pressure p1, the output pressure p2 is vented via the connection 3 (secondary venting). Good regulation characteristics with low hysteresis and primary pressure compensation. High flow rate with minimal pressure drop. High secondary venting for fast response times. Regulator lock for protecting the values against adjustment. Four pressure regulation ranges: 0.05 … 0.7 bar, 0.05 … 2.5 bar, 0.1 … 4 bar and 0.1 … 12 bar. Optional pressure sensor. Optional device variant EX4 for use in potentially explosive areas in zones 1, 2, 21 and 22.
Tarkkuuspaineensäädin Festo MS6-LRP, MS-sarjaTarkkuuspaineensäädin Festo MS6-LRP, MS-sarjaTarkkuuspaineensäädin Festo MS6-LRP, MS-sarjaTarkkuuspaineensäädin Festo MS6-LRP, MS-sarjaTarkkuuspaineensäädin Festo MS6-LRP, MS-sarja
+
5
Kondensiokuivain Festo WA
Festo
Kondensiokuivain Festo WA
Tuotenumero: T18101775
Temperature range 0 … +60 °C. Operating pressure 1.5 … 16 bar
For attachment to service units and compressed air networks/systems. Condensate present in the compressed air is separated in suitable filters. The condensate that accumulates must be emptied from time to time, as otherwise it would be drawn in and could lead to faults in the downstream elements. The devices shown perform this task automatically. They contain a float which opens when a certain condensate level is achieved. The accumulated condensate is then emptied. With an additional, installed manual override, condensate emptying can also be performed manually. Automatic emptying after the max. fill level has been reached. Automatic emptying after the operating pressure p < 0.5 bar is switched off. Manual actuation during operation is possible
Paineensäädin Festo MS9-LR, MS-sarja
Festo
Paineensäädin Festo MS9-LR, MS-sarja
Tuotenumero: T18005027
The pressure regulator maintains an essentially constant output pressure p2 independent of pressure fluctuations in the system and air consumption. The output pressure p2 can be set within the pressure regulation range either manually using the rotary knob or pneumatically via a pilot pressure p12 by an external pilot regulator. When switching off the operating pressure, the output pressure p2 is vented via connection 3 (secondary venting). Good regulation characteristics with low hysteresis and primary pressure compensation. High flow rate with minimal pressure drop. Piloted or directly actuated diaphragm regulator. Four pressure regulation ranges: 0.5 … 4 bar, 0.5 … 7 bar, 0.5 … 12 bar and 0.5 … 16 bar. Available with or without secondary venting. Actuator lock to protect set values against adjustment. Return flow option for exhausting from output port 2 to output port 1. already integrated. Optional pressure sensor. Optional device variant EX4 for use in potentially explosive areas in zones 1, 2, 21 and 22.
lFlow rate 6,500 … 33,000 l/min. Temperature range –10 … +60 °C. Operating pressure 1 … 20 bar.
Paineensäädin Festo MS9-LR, MS-sarjaPaineensäädin Festo MS9-LR, MS-sarjaPaineensäädin Festo MS9-LR, MS-sarjaPaineensäädin Festo MS9-LR, MS-sarja
Paineilman kuivain Festo LDM1
Festo
Paineilman kuivain Festo LDM1
Tuotenumero: T18104807
Flow rate 300 … 1,000 l/min. Temperature range +2 … +50 °C. Operating pressure 3 … 12.5 bar-
Pressure dew point reduction:
LDM1-…-300/600: 20 K
LDM1-…-1000: 17 K
Optimum final dryer with excellent operational reliability. Suitable for use as an individual device or for integration in existing service unit combinations. Flow rate-dependent dew point reduction. Wear-free function requiring no external energy. The composition of the compressed air remains almost unchanged due to the drying process. 15% purge air flow rate with the LDM1-…-300/600 and 20% with the LDM1-…-1000
Typical areas of application:
Drying, cleaning of precision parts
Measuring technology
Rinsing of precision glass scales
Painting systems
Paper and packaging machines
Paineilman kuivain Festo LDM1