Magneto-resistive measuring principle. Insertable in the slot from above, does not protrude over the cylinder profile. Cable clip and inscription labels included in the scope of delivery. Variant EX2 for use in potentially explosive areas in zones 2 and 22.
Measuring principle: electromagnetic or magnetic reed. Switching element function: toggle switch, single-pole (SPDT). For DC and AC voltage. Pre-assembled mounting adapter 80 x 30 H20. Cable connector and blanking plug included in the scope of delivery
Design: Block design Type of mounting: Via accessories Max. tightening torque [Nm]: 0.3 Outlet direction of connection: In-line Switching status display: Yellow LED Reproducibility of switching point1) [mm]: ±0.1
Inductive proximity sensor for T-slot, insertable from above. Suitable for position sensing for electric axes EGC and grippers with T-slot. 2 LEDs for better visibility, regardless of the side from which the axis approaches the sensor.
The SMAT-8E is a sturdy magnetic measuring system with a 50 mm range. It provides a standardised analogue current and voltage signal via an M8x1 plug connection, regardless of the drive used. The transmitter can thus be connected directly to the analogue input of a programmable logic controller. The piston position of the pneumatic cylinder is detected by contactless sensing and the travel distance can be measured between any set switching points with typical repeatability of 0.1 mm.
Design: Round Type of mounting: Screw-clamped Mounting position: Any Certification RCM trademark c UL us - listed (OL) Special characteristics: Oil resistant Degree of protection: IP65, IP68 Protection class III Based on standard EN 60947-5-2 CE marking (see declaration of conformity) To EU EMC Directive Note on materials: Halogen-free, RoHS-compliant Corrosion resistance class CRC1): 2