Pneumatiikka

Push-in connector QS

Blanking plug QSC-…H

Flow rate 120 … 12,500 l/min. Temperature range –10 … +60 °C. Operating pressure 1 … 16 bar.
Also suitable for front panel mounting. Two pressure gauge connections for different fitting options. Good regulating characteristics with minimal pressure hysteresis. High flow rate. Two pressure regulation ranges: 0.5 … 7 bar and 0.5 … 12 bar. Setting values are secured by locking the rotary knob. Return flow option for venting from output 2 to input 1

Width 10...24 mm.

Diameter 8 … 25 mm ISO 6432. Diameter 32 … 63 mm. Stroke length 1 … 500 mm

Orientable. Male thread with external hex.

Push-in fitting QS. Male thread with external hex.

Connecting thread G1/4 … G11/2. Standard nominal flow rate 3400 … 84000 l/min. With hand lever. Pipe thread to ISO 228-1.

Wide selection of push-in fittings for pneumatic applications with a temperature range up to 80 °C and a pressure range up to 14 bar. Tubing O.D. of 4, 6, 8, 10, 12, 16 and 22 mm with connecting threads Rx … R½ and Gx … G¾.

Push-in L-connector QSL

Push-in T-connector QST

Diameter 32 … 125 mm. Stroke length 10 … 2000 mm.
Standards-based cylinders to ISO15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24562, NFE49003.1 and UNI 10290)

Temperature range –20 … +60 °C

Diameter 4 ... 100 mm. Stroke length 2.5 ... 25 mm.

Diameter 12 … 125 mm. Stroke length 1 … 400 mm.

Push-in fitting QSF. Female thread with external hex.

Magneto-resistive measuring principle. Insertable in the slot from above, does not protrude over the cylinder profile. Cable clip and inscription labels included in the scope of delivery. Variant EX2 for use in potentially explosive areas in zones 2 and 22.

Flow rate 500 … 3700 l/min. Voltage 12, 24, 42, 48 V DC 24, 42, 48, 110, 230, 240 V AC

Push-in T-connector QSMT